You can’t resist uncharted territory as a Jeep® vehicle owner, so it’s only natural that your wheels match your drive. Our performance wheels are designed to handle wider, more aggressive off-road tires, giving you maximum traction wherever you go.
Jeep Performance Parts shine where the rubber meets the rock. Wheels designed to accommodate wider, high-impact, aggressive off-road tires aren’t just for the street.
OFF-ROAD ALUMINUM WHEELS
The cast aluminum power wheel jeep has a load rating of 1,950 pounds, a bolt pattern of 5″ x 5″, and a pilot bore diameter of 71.54mm. A Jeep® Branded center cap in your choice of wheel finish is also included.
Jeep® Performance Parts wheels are frequently the most commented-on item on the Jeep® vehicle, and people are surprised to learn they came from the Jeep® dealership.
BEADLOCK CAPABILITY WHEEL
Beadlock-Capable 17″ x 8″ The wheel has a backspacing of 4.4″. (12mm offset). This wheel has dual beaded seats. With the purchase of a Functional Lock Ring Kit, the tire’s outer bead can be mounted in a compliant inner location or in the outer location as a true Beadlock. Satin black wheel with a tech silver beauty ring.
The beauty ring can be painted. This power wheel jeep has a protected valve stem design, a 5″ x 5″ bolt pattern, and meets all FCA US LLC corrosion and load standards. For true beadlock capability, a Functional Lock Ring Kit (sold separately) is required.
TRUE BEADLOCK CAPABILITY BEADLOCK RING KIT
Beadlock wheels secure the outer tire bead to the rim, allowing you to run very low tire pressure for the best traction and ride. This Functional Lock Ring Kit converts your beadlock-capable power wheel jeep into a full-fledged beadlock wheel. The hardware is included.
1. WARN 106690 Epic Wheels, Fits: Jeep Wrangler JL, JK and Gladiator JT
2. TOYO OPAT3 245/65R17 111T XL
3. Rugged Ridge 11540.61 HD X-Striker HD Front Bumpers For Jeep Wrangler JK
4. Mopar 82215355 Jeep Wrangler Oversized Spare Tire Carrier Modification Kit
5. Jesse Spade Wheel, 17×9, Black Satin; 07-19 Jeep Wrangler
Modification Kit for Oversized Spare Tire Carrier
The Modification Kit includes a variety of spacers for adjusting the production spare tire carrier to accommodate larger tire assemblies. The carrier is finished in a corrosion-resistant black paint. It requires a system of tailgate reinforcement.
Relocation Kit for Center High-Mount Stop Lights (CHMSL)
The CHMSL Relocation Kit allows you to replace the spare tyre mount with larger tires and relocate the CHMSL to the center of the spare tire. It can be used in conjunction with the Oversized Spare Tire Carrier Modification Kit (P/N 82215355AC), the Tailgate Reinforcement System (P/N 82215356AC), or as a standalone component.
JEEP® WRANGLER TAILGATEJK S C A R R I E R S & R E I N F O R C E M E N T
Tailgate Reinforcement System
The Cast Aluminum Tailgate Reinforcement replaces the stock hinges and provides support for the spare tyre mount. This tailgate hinge system attaches to the existing body attachment points and can be used with or without the factory tire carrier. An oversized spare tire carrier modification kit (P/N 82215713) is required. For use with tires larger than 33″.
Modification Kit for Oversized Spare Tire Carrier
The oversized spare tire carrier can be adjusted to accommodate different tire sizes and wheel offsets. use in conjunction with cast tailgate reinforcement. Tires larger than 33″ in diameter with tailgate reinforcement are required.
PERFORMANCE DRIVELINE COMPONENTS
When driving a Jeep® vehicle, giving up is not an option. You have the ability to go over, around, and under, and you simply cannot resist. Feed your adventure addiction with durable axle components that provide the desired handling and capability.
Looking for next-level off-road capability? Choose between these front and rear axle assemblies. Our extensive axle selection caters to all types of rides, from serious expeditions to casual adventures.
JEEP ® GLADIATOR RUBICON ® C R at E A X L E
The Crate Axle Assembly has the same 4.10 ratio as the production Rubicon® Axle Assembly. Electric lockers are included with the assemblies.
JEEP ® WRANGLER JL RUBICON ® C R at E A X L E
The Crate Axle Assembly has the same 4.10 ratio as the production Rubicon® Axle Assembly. Electric lockers are included with the assemblies.
RUBICON® LOCKER WIRING HARNESS
2-wire 20-foot connector With your switch, you provide both power and ground. This allows you to power either the front or rear locking axle.
RING AND PINION GEARS DANA M210, 4.88 RATIO
Ring and Pinion Gears aid in the maintenance of vehicle performance after larger tyres are installed. The gears used by Jeep Performance Parts are made of heat-treated 8620 steel. The gear ratio is 4.88:1.
ADVANTEK® AXLE ULTIMATE DANA 44TM
The Dana 44TM AdvanTEK® Front Axle Assembly enhances off-road capability while increasing ground clearance. They are delivered as a complete assembly and are designed to be a direct bolt-on. They are available in four gear ratios (4.56, 4.88, 5.13, and 5.38) to accommodate different tyre sizes. The jeep axles shafts are heat-treated SAE-4340 chromoly, with large 1410 series universal joints load-rated at 3,600 Nm. It comes with a selectable electronic locker as well as the necessary suspension brackets. A Jeep® Branded differential cover with extra ribbing adds strength, and a 12″ rotated high-clearance carrier provides extra ground clearance.
HEAVY-DUTY RUBICON ® DANA 44 TM FRONT AXLE HOUSING
This heavy-duty axle housing fits your Rubicon front jeep axles perfectly. This housing has thicker wall tubes and greater bending strength than stock. This is a bare house, ready to accept your house’s gears, locker, and shafts.
AXLE BRACKETS KITS
When installing your own jeep axles, our kits include all of the brackets you’ll need for your Jeep® vehicle. Upper and lower control arm mounts, shock mounts, spring mounts, and track bar mounts are all included in the kit. All of the parts are made of raw steel and are ready for welding.
To Know More About Difference Between the Jeep Wrangler Models Click HERE.
DIFFERENTIAL COVERS
The Jeep Performance Parts extreme heavy-duty differential covers provide enhanced differential protection for your axle. These covers, made of nodular castings, provide increased strength and protect your differential from severe impact from rocks or off-road obstacles. They also greatly improve the rugged appearance of your axles. Each cover features exclusive Jeep Brand branding.
4.88 RATIO DANA 44 TM RING AND PINION GEARS
Ring and Pinion Gears aid in the maintenance of vehicle performance after larger tyres are installed. The gears used by Jeep Performance Parts are made of heat-treated 8620 steel.
Mopar® Introduces Plug-in Wall Chargers for Jeep® 4xe and Chrysler Pacifica Hybrid Vehicles.
“Our new at-home, Level 2 plug-in charging units provide a quick, seamless charging solution for Jeep® 4xe and Chrysler Pacifica Hybrid owners,” said Mark Bosanac, North America vice president of Mopar Service, Parts, and Customer Care. “At Mopar, we will continue to improve the customer experience and expand our electric-vehicle accessory portfolio.” Mopar’s new Wi-Fi-capable Level 2 (240-volt) charging units make at-home charging for Jeep 4xe and Chrysler plug-in hybrid electric vehicles easier.
The new charging units, which are available in plug-in or hardwired versions1 and have a maximum power of 32 amps/7.7kW, provide a full charge in just over two hours, which is up to six times faster than standard Level 1 (120-volt) chargers2.Furthermore, new Wi-Fi connectivity allows customers to monitor and control charging at any time and from any location via a mobile app and web portal, saving time and money.
Each new charging unit is Energy Star-certified and smart-grid optimized for a balance of availability, efficiency, and cost, allowing customers to save money on energy by charging at low-rate times and participating in energy credit programmes where available.